Adding Hard Disk Drive to Dell

So, this was interesting (to me). I got a new hard disk drive at work, to expand the capacity of my primary machine there, which is a Dell. Here’s the play-by-play of the process:

  1. Get a cup of tea.
  2. Open the case. No tools necessary.
  3. Take a sip of tea.
  4. Get the new drive out of its packaging.
  5. Pop the plastic drive holder out of the drive bay.
  6. Take another sip of tea.
  7. Put the drive into the plastic drive holder.
  8. Slide the disk holder into the drive bay.
  9. Attach the power and data cables.
  10. Close the case.
  11. Take another sip of tea.

So the entire process was probably no more than 10 minutes, and more likely, five. The cables were routed very well, and the interior of the Dell machine was very “clean”.

After reboot, the new hard drive was not displayed by dmesg, so after a bit of puzzlement, the machine was rebooted and I went into the BIOS, enabling all of the SATA ports. Alas, while that enabled the new hard drive, it also resulted in error messages about no device being found for the other SATA ports, enabled but without a device. From the BIOS, it was not at all difficult to figure out which SATA ports were not occupied. I hadn’t looked closely at the motherboard to see if the ports were marked 0 through 3.

Setting up the new hard drive was simple: I partitioned it (fdisk /dev/sdb) into two partitions, created a filesystem on each (mkfs.ext3 /dev/sdb[12]) and mounted them as /Depot and /Files, following the design of GoboLinux (and to a lesser extent, OS X). Mounting was straightforward, adding the following lines to /etc/fstab:

        /dev/sdb1               /Depot                  ext3    defaults        1 2
        /dev/sdb2               /Files                  ext3    defaults        1 2

In comparison to LVM, I find the old way of managing drives and partitions easier, although with the disadvantage of having to migrate data, unless, as in my case here, when the partitions are not replacing any existing ones.

My work projects were moved to /Depot, which made sense to me, since they are no longer “hidden” in /home/jpace or under /usr/users/mycompany. Similarly, audio files were moved to /Files/Audio. I may add /Programs as the target for installing new software (including our own), instead of what I’ve been using, /opt.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s